How an IPR Flexirun Rapid Door Gets Installed – Step by Step
Ever wondered how an industrial rapid door gets installed? In this post, we’ll walk you through the full installation of an IPR Flexirun rapid door – from delivery to first operation.
1. Introduction of the frame structure
Every solid door needs a strong foundation. The process begins with the presentation of the pre-built steel frame structure where the rapid door will be mounted.
2. Door arrival and unloading
Next, the IPR Flexirun door arrives on site. It’s carefully unloaded from the transport vehicle to ensure all components remain in perfect condition.
3. Introducing accessories and components
We present the included accessories such as mounting brackets, bolts, cables, and control units – all essential for proper installation and functionality.
4. Unpacking and preparing the door
The door components are unpacked and thoroughly checked. Everything is prepared for a safe and efficient installation.
5. Laying the base legs, removing panels, and setting brackets
The support legs are laid out, side covers are removed, and we start adjusting and fixing the mounting brackets, ensuring a stable and precise fit in the opening.
6. Wiring the infrared safety curtain
For additional safety, an infrared light curtain is added to prevent accidental closing. We carefully install and wire this system during setup.
7. Assembling and positioning the door
Once the individual components are ready, we assemble and lift the door into place. This step requires accuracy and expertise to guarantee smooth operation.
8. Connecting the control unit
We install and wire the control panel, allowing for multiple operating modes like pull cord switches, radar sensors, and push buttons.
9. Final testing and radar configuration
As a final step, we check the full operation of the door: opening, closing, safety sensors, and set up the radar to ensure everything runs perfectly.
We’ve also prepared a full video of the installation process, which you can watch here: Watch the video
If you have any questions about the installation, operation, or our products, don’t hesitate to contact us – our experts are happy to help!
Ever wondered how an industrial rapid door gets installed? In this post, we’ll walk you through the full installation of an IPR Flexirun rapid door – from delivery to first operation.
1. Introduction of the frame structure
Every solid door needs a strong foundation. The process begins with the presentation of the pre-built steel frame structure where the rapid door will be mounted.
2. Door arrival and unloading
Next, the IPR Flexirun door arrives on site. It’s carefully unloaded from the transport vehicle to ensure all components remain in perfect condition.
3. Introducing accessories and components
We present the included accessories such as mounting brackets, bolts, cables, and control units – all essential for proper installation and functionality.
4. Unpacking and preparing the door
The door components are unpacked and thoroughly checked. Everything is prepared for a safe and efficient installation.
5. Laying the base legs, removing panels, and setting brackets
The support legs are laid out, side covers are removed, and we start adjusting and fixing the mounting brackets, ensuring a stable and precise fit in the opening.
6. Wiring the infrared safety curtain
For additional safety, an infrared light curtain is added to prevent accidental closing. We carefully install and wire this system during setup.
7. Assembling and positioning the door
Once the individual components are ready, we assemble and lift the door into place. This step requires accuracy and expertise to guarantee smooth operation.
8. Connecting the control unit
We install and wire the control panel, allowing for multiple operating modes like pull cord switches, radar sensors, and push buttons.
9. Final testing and radar configuration
As a final step, we check the full operation of the door: opening, closing, safety sensors, and set up the radar to ensure everything runs perfectly.
We’ve also prepared a full video of the installation process, which you can watch here: Watch the video
If you have any questions about the installation, operation, or our products, don’t hesitate to contact us – our experts are happy to help!
